Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
arduino_clones:avrdude [2015/10/14 19:27] admin |
— (current) | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ---- | ||
| - | **AVRdude** | ||
| - | ---- | ||
| - | AVRDUDE is a command line tool to program AVR chips. It runs in the background of the Arduino IDE. Sometimes it is necessary to erase a chip or set the fuse bits that's when the AVRdude comes handy. | ||
| - | |||
| - | Dokumentations:\\ | ||
| - | [[http://www.nongnu.org/avrdude/user-manual/avrdude.html]]\\ | ||
| - | Command description:\\ | ||
| - | [[http://www.nongnu.org/avrdude/user-manual/avrdude_4.html]]\\ | ||
| - | |||
| - | ---- | ||
| - | **-P**\\ | ||
| - | The device to which the programmer is attached is on\\ | ||
| - | - Linux: /dev/ttyACM0\\ | ||
| - | - Windows: com2\\ | ||
| - | **-c**\\ | ||
| - | The programmer for example: stk500v2\\ | ||
| - | |||
| - | **ATmega32U4**\\ | ||
| - | To erase the chip: | ||
| - | sudo avrdude -p m32u4 -c stk500v2 -P /dev/ttyACM0 -e -F | ||
| - | |||
| - | **ATmega328p**\\ | ||
| - | To erase the chip: | ||
| - | sudo avrdude -p m328p -c stk500v2 -P /dev/ttyACM0 -e -F | ||
| - | | ||
| - | **ATmega168**\\ | ||
| - | set the fuse bits: | ||
| - | avrdude -c stk500v2 -p m168 -P /dev/ttyACM0 -B 6 -v -U lock:w:0x3f:m -U lfuse:w:0xff:m -U hfuse:w:0xdf:m -U efuse:w:0x0:m | ||